Equipment> Shop Equipment
 

 


HTTMJ3-2.jpg (25815 bytes)

 

1,000 LB. Capacity 2 Stage Air/Hyd. Transmission Jack - $529.00

This two stage transmission jack has everything that the hydraulic version does but also features the ease of being air powered. Raising the cradle into position using air saves both time and effort.

  • 1,000 LB. Capacity
  • Air/Hydraulic operated
  • Fully lowered – 3’ ½” (36 ½”)
  • Fully raised – 6’ 3” (75”)
  • Stage one fully extended – 4’ 9” (57”)
  • Swivel casters allows for easy maneuverability
  • Universal adjustable saddle
  • Saddle: 2 way tilt (front-to-back) with side shift
  • Safety chain and brackets included
  • Foot operated pedals for raising and lowering
  • Shipping Weight - 217 lbs.
  • Shipping Dimensions: 35" x 15" x 22"

 


Over Engine Creeper/Topsider - $375.00
  • Adjustable height (47 ½" - 58 ½") and tilt.
  • Swivel casters for easy movement.
  • Convenient tool drawer
  • Shipping Weight: 97 lb.

 


Convertible Creeper/Rolling Chair - $69.00
The convertible Creeper/Rolling Chair is great for any home or commercial garage. This unit easily changes from a flat creeper for under vehicle work to a rolling seat for doing detail and body work. This Creeper/Rolling Chair features an adjustable back rest when being used as a chair and has 1 ½” thick foam-padding for comfort. This Creeper/Work Stool also features 7 swivel casters for easy all direction movement.

Features

  • Lever control to convert from flat Creeper to Rolling chair
  • Adjustable back rest
  • 1 ½" foam-padding
  • Seven 2 ½" polyurethane swivel casters for easy movement

Wheel Dollies (set of 4) - $80/pair
  • Set of four
  • Each dolly has four swivel casters which hold up to 1000 lbs.
  • Made out of formed steel with ball bearing swivels
  • Dimensions - 15 ¼” W x 23 ¾” L
  • Easy to move in any direction
  • Shipping Weight: 96 LBS.

 


"Move-It" Wheel Dolly - $250/pair
"Move-It" dollies are very easy to use. Simply position the tire in between the rails, and use the foot pump to bring the rails closer together. As the rails move inward, the tire lifts off of the ground.

Features

  • 1,500 lb. capacity per dolly
  • 22" - maximum distance open
  • 11" - minimum distance closed
  • 12" - maximum wheel width capacity
  • Shipping Weight: 43 lb.


Auto Rotisserie $1,895
Price includes Leaf Spring Bracket, Uni-Body Bracket, Valance Bracket and Universal Door bar adapter set.

This auto body rotisserie is great for anyone wanting to restore a car or truck body or frame. The rotisserie allows a full 360º of vehicle movement by just turning the crank. When the vehicle is properly mounted and positioned, the Auto SPINS allows the operator to have easy access to all parts of the body for welding, sandblasting, or any other work that needs to be done. This unit is adjustable not only in width and length, but with two hydraulic rams, is also adjustable in height. The two hydraulic rams make it easy to mount and lift the vehicle so that it can be rotated into the proper position. And the new threaded rod adjusters let you find the frame’s center of gravity, ensuring balance and stability.

The two hydraulic rams also make it easier to mount an auto body; lifting the body or frame straight from jack stands to the desired working height removing the need for any other equipment. The rotisserie is also easy to roll because of the three (3) swivel caster wheels on each end. This versatile auto rotisserie is a must have for any hobbyist or professional restorer.

Features

  • 360 degrees of Movement
  • Threaded rod adjuster makes finding center of gravity easy
  • Powder coat finish
  • Heavy Duty Construction
  • Adjustable Width, Height, and Centering
  • 2 Hydraulic Rams For Greater Height Adjustability
  • 6" diameter, 1 1/2" wide Polyurethane Swivel Caster Wheels
  • Specialty Adapters Also Available
Auto SPINS Rotisserie Specifications
Maximum Weight Capacity 3000 LBS.
Width (Mounting Brackets) 14 1/4" - 48 3/4"
Width Capacity (Car Or Truck Body) 85"
Working Height 20 1/2" - 48 1/2"
Working Length (Weight capacity is decreased when fully extended) Up to 19'
Ceiling Height Required 8'
Warranty 1 YR
Thickness Of Steel 1/8"(9 Gauge)
Construction Main Structure 3"x3" Square Tubing
Shipping Weight 600 LBS.

 

8 Gallon Oil Drain- $129.00

Features
  • Four swivel casters make it portable and easy to maneuver
  • 17” funnel diameter
  • Raises up to 55” tall

2,000 LB. Capacity Folding Engine Stand - $210.00

This 2,000 lb. capacity foldable Engine Stand is constructed of heavy duty angular steel. It features an adjustable mounting head which rotates 360º for easy access to any part of the engine. This engine stand is also foldable for easy storage in any shop.
  • 2,000 LB. Capacity
  • Height – 2’ 8 ½” (From floor to middle of backing plate)
  • Rear, swivel casters allows for easy maneuverability
  • Front, fixed casters 
  • Rotating backing plate
  • Shipping Weight: 88 LBS.

1250lb Engine Stand - $175.00

This 1250 lb. capacity Engine Stand is constructed of heavy duty angular steel. It features an adjustable mounting head which rotates 360º for easy access to any part of the engine.

Features

  • 1,250 LB. capacity
  • Fully adjustable mounting head secures rear of engine to stand
  • Sliding 20” handle and 360 degree rotating head allow for easy rotation of engine
  • Shipping Weight: 67 LBS.

 


Engine Cradle - $59.00
  • 1000 lb. capacity
  • Fits most Small Block Chevy engines
  • FOUR heavy duty casters for easy maneuverability
  • Used for storing, transporting, and working on “in progress” engines
  • Low design for maximum stability when working on engines
  • Shipping Weight: 21 LBS.

 


 

Goodyear Racing Folding Cherry Picker - $495.00

This Cherry Picker’s strong design allows for maximum lifting power at a minimum of shop space. The adjustable boom on this 2 Ton Engine Hoist means that it will work for pulling and installing a variety of engines. This Folding Engine Crane also features strong, steel swivel casters and adjustable length legs; making it easy and safe to move an engine from car to work space in seconds.

  • Used for raising, lowering, transporting engines, transmissions, or heavy loads with minimal effort
  • Four position telescoping boom adjusts from ½ ton to 2 ton capacity
  • 8 ton capacity long ram hydraulic jack provides fast raising action
  • Large diameter ram helps withstand side loads
  • Two adjustable front telescoping legs for greater stability and versatility
  • Six heavy duty ball bearing swivel front and rear casters
  • Made with heavy duty steel tubing
  • Shipping Weight: 193 LBS.
  • Shipping Dimensions: [59 ¾" x 12 ½" x 6 ½"] / [34 ½" x 27" x 5"] - 2 boxes
     

600lb Engine Support Bar - $129.00

Features

  • Adjustable width
  • Minimum width - 44 ½”
  • Maximum width - 62”
  • Shipping Weight: 33 LBS

 


1000lb Engine Support Bar - $149.00

Features

  • Width - 59”
  • Shipping Weight: 41 LBS

 


2 Ton Heavy Duty Tripod Stand Tall - $195.00
The 2 ton heavy duty tripod stands are the perfect choice for the mechanic who is working on a vehicle that is lifted by a two post lift or a four post lift. The adjustable 2 ton heavy duty tripod stand is used to offer additional support to either the front or the rear of the vehicle while performing service work on the two post or the four post above ground lift.

These jack stands can be placed between the runways of a four post lift and when the runways of the four post lift are lowered, the jack stands will support the weight of the vehicle. The wheels will be above the runway of the four post lift and wheel service can be easily performed.

These jack stands can be adjusted to various heights to offer additional support for a vehicle that is being lifted by an above ground two post lift. If you are pulling an engine or a transmission from a raised vehicle, you are changing the weight distribution. The tall jack stands will support the change of weight distribution.

Features

  • Minimum height - 48 ½”
  • Maximum height - 84”
  • Shipping Weight: 39 LBS.

 


20 Ton Hydraulic Shop Press - $399.00
The Atlas 20-ton heavy duty H-frame shop press utilizes a hydraulic bottle jack that delivers up to 20 tons of pressing force. When components need to be removed or assembled, this press delivers the controlled power to get the job done. The pressing ram head is forced down by the pressure of the bottle jack’s piston pressing against the top plate. Heavy return springs collapse the bottle jack piston after the job is finished.

Features

  • Includes Pressing Blocks
  • Shipping weight: 188 LBS.

 

Clarke's Southern Truck Parts